en English


Let's see how you can build the trellis for your vineyard for the profit and health of your vineyard.

Making a trellis for your vineyard that will safely and securely support your vines is essential to the overall health of your plants and harvest. You will want to build a structure before you plant any vines or add any ブドウ園の網.

Excess sunlight and wind can cause stress on your budding vines, stunting their growth. By building a trellis in the early growing season, you can make sure that your vineyard is correctly cared for from the very start.


1. Decide on Your Trellis Design

The first thing you need to do is decide on your trellis design. Many trellis designs have been used over the years. They may be the same in some aspects, but they will differ according to their usage and the vineyard’s climate.

The most common types of trellis systems are:

  • Cordon System
  • Vertical Shoot Positioning (VSP) System
  • Geneva Double Curtain (GDC) System
  • Scott Henry System

You will find that the most common type of trellis system is the Vertical Shoot Positioning (VSP) system. The VSP system trains vines up a wire with canes tied to this wire. This type of system is more commonly used in warmer climates as it allows for better airflow around the fruit zone and reduces the risk of mildew and fungus.

There are three types of VSP trellises, which include:

  • Single Wire Trellis
  • Double Wire Trellis
  • Smart-Dyson Trellis

2. Decide on the Material for Your Posts and Wire

Next, after you settle on trellis design, decide on what material you want to use for your posts and what type of wire you want to use. The types of material used for posts will depend on how long you intend for this trellis to last and also how much weight it will need to hold.

The common materials for posts include:

  • 木材
  • 金属
  • 塩化ビニルパイプ

To know the number of posts you will need, take the length of your row or rows and divide by 10 feet.


If your rows are 100 feet long, you will need 10 posts per row. Assuming that you’re doing 2 rows, that means 20 posts total. You can choose a zig-zag pattern with your trellis construction, so if one row is 100 feet long and the other is 80 feet long, that would mean 20 posts on the first row and 16 posts on the second row.

You may want to consider using different types of wire for each layer or section of the vineyard. Eyouagro recommends using a heavier gauge wire for bottom layers, closer to the ground, where vines are stronger and a lighter gauge wire at the top where vines are more likely to break.

3. Place Your Posts in the Holes

To make the trellis, you should use 6-inch by 6-inch posts that are around 10 feet long. It is important to place these posts about 8 to 10 feet apart, depending on the length of your vineyard.

You will also need 4-inch by 4-inch posts that are around 8 feet long to run along the top of your trellis. Place these posts about 5 feet apart, depending on the length of your vineyard.

Place posts in the holes and ensure that they are level and straight. Put a concrete mix in each hole and place a row of nails in each post, leaving a few inches at the top of each post without nails so that you can attach another row of posts later on.

You will then need to prepare more holes for your second row of posts, but at this point, they should be placed 5 feet apart from one another. Repeat this process using concrete and nails as before, ensuring that each hole is dug at least 3 feet deep.

4. Fill in the Holes around Your Posts

Once you have chosen your posts, you should decide on how tall you want your trellis to be. The taller you go, the more space it will take up in your vineyard. In addition, if you have a large vineyard or grapes that grow long vines, then they may not fit through a smaller trellis!

The next step is installing the post into the ground. This can be done by hand or with machinery such as an auger or post hole digger. You must dig deep enough so that there is no danger of it falling over when someone walks by it because this could cause injury if someone trips on it!

After installing your post, fill in any gaps around them with soil so that water drains away from them instead of pool

5. Install a Wire System to Support Your Vines

To install a wired system, you need to prepare posts and galvanized wire beforehand. Posts should be at least 2 m long and made from treated wood. To prevent rotting, be sure to insert them at least 50 cm into the soil! Measure out and mark where you want your posts to go, then dig holes using a post hole digger (or you can use an auger).

Next, set the posts in place and secure them with concrete. Once they’re in place, run wire between each post.

When installing the wires, make sure they are taut but not overly so. Leave enough space between the bottommost wire and the ground for your workers to move around freely once the vines start growing. Typically, this will mean leaving a 1-1.5 meter gap between the ground and the lowest wire. Preferably, leave more space between the topmost wire and trellis post. This will allow you to prune more easily in the future!

Before planting your vines, you will need to attach vineyard wire clips to support them. If you’re using training wires or VSP (vertical shoot positioning) system, these clips should be installed at every point where a vine meets a support line. For two-wire systems.

6. Install Vineyard Netting Over Your Vine Plants

Once you build your vineyard trellis, your next stop is ブドウ園の網. This is the most effective and efficient way to protect your vines from birds, insects, and harsh weather. You can get the netting from vineyard suppliers. The netting comes in varying widths, but our 12’ wide netting provides ample coverage for one row of vines.

You can install vineyard netting over your trellis system by running a rope along the top of the posts and then draping the netting over it. The rope should be pulled tight to prevent birds from sneaking under the netting.

ドレープ ブドウ園の網 over the trellis system so that it falls on both sides of the vines but does not come in contact with the foliage or fruit. If you are using a double-post trellis system, pull the netting down over one side, weave it through the posts, and pull it up over the other side. Secure your vineyard netting by stapling it to wooden stakes or tying it to wire anchors.


Building trellises isn’t hard. How you do it and what material you choose to use is entirely up to you, since vineyards come in many shapes and sizes. If you’re concerned about the expense of materials, you can reuse old posts, build from pallets or use recycled steel instead of buying new wood, consider getting creative. The goal is to have a strong, sturdy structure for your vines to climb on and over as they produce fruits for years to come.

Eyouagro manufactures quality and environmentally friendly netting products to protect and support your vineyard plants.

Kindly, contact us at [メール保護] の選択の詳細については vineyard products and other fruit recommendations.

過去24年間で、私たちは55か国と、農場、果樹園、ブドウ園などの150を超えるクライアントが植物を保護するのを支援してきました。 この記事の目的は、植物をより健康でより強くするための農業成長保護に関連する知識と共有することです。



Iso 9001 2015
Ukas Iaf





1営業日以内にご連絡いたします。接尾辞が付いたメールにご注意ください。 「@ eyouagro.com」